Not logged in - Login
< back

WAQS 2011b Modeling Platform

Abstract

The 3SAQS project performed photochemical grid modeling (PGM) for the year 2011 using the Comprehensive Air Quality Model with Extensions (CAMx) version 6.20 and the Community Multiscale Air Quality (CMAQ) model version 5.0.2. The 3SAQS 2011 Modeling Protocol details the CAMx and CMAQ configurations and justification for why they were chosen for the WAQS. Version B of the WAQS base 2011 modeling platform (WAQS_Base11b) includes air quality modeling results for 36-km, 12-km, and 4-km modeling domains. The WAQS 2011b modeling platform includes a future projection year (2025) and CAMx source apportionment studies. The set-up and configuration of the WAQS 2011b platform was derived from the 3SAQS 2011 version A (3SAQS_CAMx_Base11a) modeling platform, but differs significantly in the input data used in the simulation.

CAMx Modeling

Access points and important distinctions between WAQS 2011b source apportionment and 2-way nested model configurations.

The Western Air Quality Study (WAQS) conducted a CAMx 2011b base case simulation using a 36 km resolution CONUS, 12 km resolution WESTUS and 4 km resolution Intermountain West (i.e., CO, UT, WY and northern NM) modeling domains with two-way grid nesting. The CAMx 2011b 36/12/4 km base and future (2025 based) two-way grid nestingcase simulation results are available on the Intermountain West Data Warehouse (IWDW) that includes model documentation, including a modeling protocol and model performance evaluation.evaluation. The modeling platform input and output files can be accessed through the IWDW Data Request Page, and a model-to-observation tool on the IWDW website allows users to compare and download paired PGM model output and observational data for specific monitor locations and time periods.

The WAQS 2011b modeling platform includes a future projection year (2025)Ozone and CAMxPM source apportionment studies. The(SA) set-upmodeling was also conducted using an “a” and configuration“b” versions of the WAQSCAMx 2011 database with results available through a SA wiki on the IWDW that includes an interactive Source Apportionment Visualization Tool (SA Vis Tool). Several rounds of SA were performed, due to resource constraints the ozone SA modeling (Round 2, 2011b platformversion) was derivedperformed fromon the 3SAQS36/12 2011km versionCONUS/WESTUS A (3SAQS_CAMx_Base11a) modeling platform, but differs significantly in the input data used in the simulation.

The 3SAQS project performed photochemical grid modeling (PGM) for the year 2011 using the Comprehensive Air Quality Model with Extensions (CAMx) version 6.20domains and the CommunityPM MultiscaleSA Airmodeling Qualitywas (CMAQ)conducted modelon versionthe 5.0.2.36 Thekm 3SAQSCONUS 2011domains, Modeling Protocol detailsthus the CAMx andSA CMAQmodeling configurationsresults andwill justificationnot forexactly whymatch theythe CAMx 2011b 36/12/4 km base case modeling results because different domains were chosen for the WAQS.used. Version B ofEven the WAQS baseRound 20112 modelingCAMx platform2011b (WAQS_Base11b)36/12 includeskm airozone qualitySA modeling results for 36-km,the 12-km,12 andkm 4-kmdomain will not match the CAMx 2011b 36/12/4 km base case 12 km results because the two-way nesting will replace the 12 km modeling domains.results The WAQS 2011b modeling platform includes a future projection year (2025) and CAMx source apportionment studies. The set-up and configuration ofby the WAQS4 2011bkm platform was derived from the 3SAQS 2011 version A (3SAQS_CAMx_Base11a) modeling platform, but differs significantlyresults in the inputCAMx data2011b used36/12/4 inkm thebase case simulation.

Overview

Access points and release notes and for WAQS 2011b 36/12/4km two way nested simulation.

The 2011b model platform was reviewed and approved by the IWDW-WAQS Cooperating Agencies. The model products are released for use in regional air quality modeling studies by the cooperating agencies and for external users accepting the terms of the IWDW Data Use Agreement and authorized by the Cooperators. See the 2011b modeling platform description for use recommendations, errata, and a detailed list of available files.

Model Configurations

Important distinctions between WAQS 2011b two-way nested grid and source apportionment model configurations.

Ozone and PM source apportionment (SA) modeling was also conducted using an “a” and “b” versions of the CAMx 2011 database with results available through a SA wiki on the IWDW that includes an interactive Source Apportionment Visualization Tool (SA Vis Tool). Several rounds of SA were performed, due to resource constraints the ozone SA modeling (Round 2, 2011b version) was performed on the 36/12 km CONUS/WESTUS domains and the PM SA modeling was conducted on the 36 km CONUS domains, thus the CAMx SA modeling results will not exactly match the CAMx 2011b 36/12/4 km base case modeling results because different domains were used. Even the WAQS Round 2 CAMx 2011b 36/12 km ozone SA modeling results for the 12 km domain will not match the CAMx 2011b 36/12/4 km base case 12 km results because the two-way nesting will replace the 12 km modeling results by the 4 km results in the CAMx 2011b 36/12/4 km base case simulation.

Meteorology and Emissions

Air Quality Modeling